3d printer slicer settings for top layers

#3d printer slicer settings for top layers download

Some materials have an extreme low viscosity at printing temperatures and that’s why you must print them with high printing speeds and part cooling fan. Also check if the fan and ventilation slot are in right position (control, that the air cools your part and doesn´t go anywhere).

If your printer has a part cooling fan you should activate it or increase the fan speed. To realize higher angles of overhangs, your material has to cool down quite fast after printing it. To prevent your print of failed overhangs or to reduce support structure, it is also possible to reduce the layer height in your slicer software. Keep in mind, that support material takes additional printing time and sometimes optimization of your models’ placement is another solution. We recommend starting with the standard settings in your slicer program, if you have to change them, try again and repeat the try and error method. We can´t recommend which settings are the best, because they change when you change layer height or material.

#3d printer slicer settings for top layers download

Perfect placement, adding support structure or breaking the part into more pieces are common tricks to optimize your 3D print. You may use an overhang test model, like the one from the make magazine, download link: Add a support structureĪn easy way to get better results are support structures. Obviously, you cannot print into the air and that´s why you must consider about some points before you start your print. In FDM / FFF 3D printing, each layer must be built upon another. Typically, around 45-degree angle are possible to print.

It depends on the material, the printer you are using and on your printing settings, which angles of overhangs are possible to print. It's not trivial to get a perfect result with “perfect” overhangs. We started with our troubleshooting guide with more than 25 common and uncommon problems for 3D printing.Ģ4. Stop extruding in the middle of print In this guide we want to collect helpful tools for you to use and to enhance your 3D prints quality.